Currently In Stock in WA and Available for Demo.

The Pertici P104 is 1 Machine that offers a 1000 Solutions.

Aluminium CNC Profile Machining Centres are designed for drilling, milling, taping and end notching operations in several materials including:

• Aluminium Extrusions

• Light Gauge Steel Profiles

• uPVC Profiles

• Composite Profiles

CNC ROUTER

Pertici P104 CNC Aluminium Profile Router

POA

PRODUCTS

ALUMINIUM

Technical

Spindle Power RPM - 5KW (max) / 20'000 (max)

Volt/Freq/Amp - 415v (4A+E) /50/16

Axis X Travel/Speed (longitudnial) - 3450mm / 50m p/min

Axis Y Travel/Speed (transversal) - 790mm / 50m p/min

Axis Z Travel/Speed (vertical) - 400mm / 15 p/min

Axis A Travel (rotation) - 0-180 Degrees

Tool Holder - HSK-50F

Number of Tools in Holder - 8

Additional Information

Weight : 1800 KG

Dimensions : 4300 x 1750 x 2400 mm

Technical

Spindle Power RPM - 5KW (max) / 20'000 (max)
Volt/Freq/Amp - 415v (4A+E) /50/16
Axis X Travel/Speed (longitudnial) - 3450mm / 50m p/min
Axis Y Travel/Speed (transversal) - 790mm / 50m p/min
Axis Z Travel/Speed (vertical) - 400mm / 15 p/min
Axis A Travel (rotation) - 0-180 Degrees
Tool Holder - HSK-50F
Number of Tools in Holder - 8

Additional Information
Weight : 1800 KG
Dimensions : 4300 x 1750 x 2400 mm

The P104 CNC machining centre with 4 controlled axis is designed to perform milling, drilling, tapping, and end milling operations on bars or workpieces made of aluminium, PVC, light alloys in general, and steel up to 2 mm thick. Adapt your machining centre to your needs, guaranteeing flexibility and maximum efficiency!

The centre has a pneumatic left-hand zero stop that allows profiles up to 3.2 m to be machined, a doubled length with the optional installation of a second zero stop. The electro-spindle with 5 kW power in S1 and HSK-F50 cone attachment allows machining on the profile at any angle between 0° and 180°.

The P104 machining centre ensures precise and safe operations. The profile clamping is guaranteed by four clamps with reduced overall dimensions, allowing maximum machinability on the three faces of the profile and the loading of even relatively short workpieces. The maximum cross-section of the clamp can accommodate a profile of 225 mm in base and 260 mm in height. The arrangement along the X-axis is a key feature of these centres. Thanks to the mobile carriage, the clamp is hooked and positioned with maximum precision, ensuring optimized positioning over the machining operations of the profile and maximum safety against possible collisions. The P104 machining centre also features an 8-position tool magazine, fixed to the centre of the bed.

With its moving-column machine concept, it is designed for high work rates within a relatively compact overall size. This design not only ensures high productivity but also offers the operator excellent ergonomics when loading/unloading workpieces, enhancing the overall efficiency of your operations.